Welcome to iiiC Technology

Outline

LED Display Solutions

Outline

This LED Display Solutions Consists of 3 Parts:

Part 1: Design of the frame. Users can find the introductions about the cabinet, use of the accessories, ways of installation, design of the main frame and the other issues that need attention.

Part 2: Connection of the display. This part tells the users how to install the cabinets, and how to connect the signal and power wires and cables.

Part 3: Commissioning and Maintenance. In this part, users will be able to find out how to set up, test and maintain the display. Daily maintenance tips are also given. They will also find the explanations for the functions and usage of the control boards.

Part 1 Design of the Frame

LED Display Solutions

Part 1 Design of the Frame

1. The cabinet and the display

Dimension for the cabinet( as shown in Figure 1): 480mm X640mmX150mm :

As can be seen in the following Figure 2, a LED display screen comprises "m" rows and "n" columns of the cabinets. The front sizes of the cabinet are : 480*m X 640*n:

Controller For 4-wire Resistive

Touch Screen Solutions

Controller For 4-wire Resistive

USB Controller-4 wire Touch Panel

This touch panel controller provides the optimistic performance of your analog resistive touch panels for 4-wire models. It communicates with PC system directly though USB connector.You can see how superior the design is in sensitivity, accuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operations systems, including Microsoft Windows XP, 2000, 95/98, Windows Me, NT4.0, CE2.12 & 3.0/ NET, DOS.

USB

RS232

Read more...

Part 2 Installing and Connecting the Display

LED Display Solutions

Part 2 Installing and Connecting the Display

1. Install the horizontal fastener

First of all, the client should make sure that the fastener itself is positioned horizontally. Then fix the installation plates to the fastener.

The installation starts with the 1st row of the cabinets from the bottom. It is important to confirm the horizontal level and the bottom position of the 1st row.

Users can get the bottom position according to the dimensions of the frame structure or through calculation of the size of the display. It is better that we fasten the steel bar with the installation plate at the bottom of the 1st row of cabinets. By doing so, we can be sure that the 1st row of the cabinets are horizontal.

① Fasten the bar steel with the installation plate on the bottom of the cabinets.

5-Wire Resistive Touch Screen

Touch Screen Solutions

5-Wire Resistive Touch Screen

How it works

5-Wire resistive touch screen is the preferred solution for applications requiring durability and reliability over time. Similar to the 4-Wire technology, 5-Wire touch screen also consists of a conductive bottom layer (ITO Glass or ITO Film) and a conductive top layer (ITO Film).

The fundamental structure difference between the two is: in the 5-wire technology, all the electrodes are placed on the bottom layer and the top layer acts only as a voltage measuring probe. Therefore, the touch screen works properly even with damages or scratches on the top layer.

Read more...

iiiC Technology

Outline

Part 1 Design of the Frame

Controller For 4-wire Resistive

Part 2 Installing and Connecting the Display

5-Wire Resistive Touch Screen

Main Menu

Login Form

iiiC Group